91	Machine Tools Also Part of Green Wave ( May. 11, 2010 )
- New models machine parts for wind power generation, minimize cutting fluid use. - Doosan Infracore is now capable of producing 10,000 units per year, expects 2010 sales to be 50% higher than last year's total. The world is now riding a wave of low-carbon green growth, and the movement has now reached the machine tools industry as well. Doosan Infracore has introduced new heavy-duty turning centers and machining centers to produce parts used in wind turbines as well as a new die & mold machining center that is designed to use minimal cutting fluid. The VTS1620M is a heavy-duty turning center targeting the energy industry (wind farms and gas field development). It features the very large spindles and frame to machine pieces are large as 2,000mm in diameter and 1,600mm high, 20% more than other heavy-duty models can provide. The DBC130L is designed to machine parts that can sustain very heavy loads such as those required by massive wind turbines. This heavy-duty, numerically-controlled boring machine performs precision work on pieces up to Y axis 2,500mm and as heavy as 20 tons. The NX5000/6500 die & mold machining centers come with minimum quantity lubrication (MQL) systems that spray a mixture of high-pressure air with extremely small amounts (1.0㎛ or less) of cutting fluid onto the area being machined. Almost no wastewater and waste oil are generated. The Machine Tools BG stepped up its marketing effort for these new models at the 14th annual Seoul International Machine Tools Show (SIMTOS 2010), held at the Korea International Exhibition Center (KINTEX) April 13-18. These environment-friendlier machines were among the 18 models on display at the Doosan Infracore booth. Booth visitors also were given a look at high-speed, highly-refined die & mold machining centers; next-generation, multifunction machining & turning centers; multifunction Swiss turning centers; and high-precision wire-cut electrical discharge machines. The lineup underscored Doosan Infracore's stature as the world's third largest machine tool maker. Machine Tools BG Kim Jae-seop says: "New facilities investment in the IT and automotive parts industries has fully returned from the second half of last year. We are ready to respond to the increased demand with an annual output capacity of 10,000 units. We expect our factory to continue working at 150% the capacity utilization rate during the first half of this year and we are marketing our new models heavily. As a result, we expect annual sales to be 50% higher than they were a year ago." SIMTOS has emerged as one of the world's five major trade shows for the machine tool industry. This year's event was attended by all the major Korean makers as well as such big names as Yamazaki Mazak, DMG, and Mori Seiki. More than 100,000 visitors came to the show.
90	Doosan sees New Opportunities in Recovering Economy ( Mar. 31, 2010 )
The tough economic conditions of the past few years are coming to an end, and it’s time for machine tool builders and their distributors to get back to work with new products, new offerings, and new directions.That was the message communicated by Doosan at its 16th annual distributor mee...
89	Doosan Machine Tools at EMO 2009 ( Nov. 6, 2009 )
The Machine Tool World Exhibition, promoted by the European Committee for the Co-operation among Machine Tool Industries (CECIMO), opened in Milan October 5-10. This is one of the world's four major events in the machine tool industry, along with IMTS in the US, JIMTOF in Japan and CIMT in Chi...
86	BIG MACHINES…BIG POWER UNVEILED AT DIMF ‘09 ( Jul. 15, 2009 )
Doosan Infracore hosted more than 2000 customers and dealers at its bi-annual DIMF (Doosan International Machine Fair) in Changwon, Korea. It was the company's seventh such show, dating back to 1997. Featured at the show were more than 40 turning centers and machining centers, some that are totally...
85	Korea’s Largest Machine Tools R&D Center to Spear... ( Jul. 15, 2009 )
After one year of construction, Doosan Infracore has completed the largest development center in Korea’s machine tools industry to date. The ribbon-cutting ceremony was held at Changwon Factory 1 on November 28 with more than 400 people attending, including Doosan Infracore Chairman Park...
84	Doosan Celebrates Opening Of Energy and Petroleum Engin... ( Jun. 17, 2009 )
Houston, TX - On April 27, Doosan-AmTTech celebrated the Grand Opening of an Engineering Center specializing in the unique demands of companies producing parts for the burgeoning petroleum and energy-generation industries. Describing the scope of this new center, Jack Butts, the Engineering Cent...
83	DIA Hosts 2009 Machine Tool Distributor Meeting ( Apr. 27, 2009 )
The Doosan Infracore America Machine Tool Division held its 15th annual Distributor Sales Meeting at the Westin Dawn Beach Resort in St. Maarten, Netherland Antilles March 12-14. Seventy-five representatives from twenty-eight distributors in the US, Canada and Latin America were in attendance. Th...
82	Doosan Infracore in the Global Spotlight at IMTS 2008 ( Oct. 30, 2008 )
- The Doosan brand and technology are intensively promoted in the North American market.- The company introduces machine tools used exclusively for making parts or for use in the petroleum industry.- Doosan Machine Tools as the optimal system provider is enhanced by the full product lineup, ...
81	Doosan Infracore makes a positive foray into North Amer... ( Oct. 21, 2008 )
Participating in IMTS 2008 in Chicago, displaying equipment for parts processing and those used in oil field industry Making efforts for reinforcing the brand image of a business engaged in various types of equipments   Doosan Infracore employs the strategy of reinforcing its image as ...
80	Doosan Machine tools Technical Center inaugurated in Ba... ( Sep. 3, 2008 )
Bangalore, August 28,2008: Doosan Infracore India Pvt.Ltd, the Indian arm of Korean Machine Tool giant Doosan infracore opened their first Technical Center in Bangalore today. The 10,000 Sft facility located at Bommasandra Industrial area in Bangalore is set up at a cost of one million US Dollars. ...

1 [2] [3] [4] [5] [6] [7] [8]